Brick-Compatible Motor System LED Light Cable

Each cable delivers two clear round dome-top LED bulbs powered through a single 2×2 brick-form connector, the same connector style used across the BRICK BROS motor system. The power end presses onto the 2×2 stud contacts of a PF-style battery box, IR receiver, or extension wire; the black flat ribbon cable routes neatly through any build; and the two individual wire leads place each LED bulb exactly where you need it. Plug in, build around it, and light up. No soldering, no tools, no modification required.

What's Included

• 1 LED light cable per pack
• 1 × dark grey 2×2 brick-form connector, power input end, 2 studs on top, brick-mountable
• Black flat ribbon cable + 2 individual black wire leads
• 2 × clear round dome-top LED bulbs, one per wire lead
• Works with PF-style (8870-type) battery boxes, receivers and extension wires. Power source sold separately

Accessory Details

• Power Connector: Dark grey ABS 2×2 brick-form connector, 2 studs on top, 2 port slots on face, brick-mountable in standard builds
• Cable: Black flat ribbon cable from power end, splitting into 2 individual flexible black wire leads
• LEDs: 2 × clear round dome-top LED bulbs, white illumination, small profile fits in 1-stud openings
• Connection: presses onto PF-style 2×2 stud contacts, no tools required. Needs a battery box or receiver for power (sold separately)
• Compatible with: BRICK BROS 8870, motor system battery boxes, IR receivers, 8869 extension cords, extension wires, 9686
• Pack: 1 complete LED light cable

Perfect For

• Train headlights and tail lights on motorized locomotive builds
• Interior room lighting in modular building and city scene MOCs
• Vehicle cockpit accent lighting and headlight detail
• Street lamp, lighthouse, and exterior scene lighting builds
• Display dioramas and showcase MOCs requiring atmospheric lighting
• Gifts for AFOL builders and powered-build Bricks fans, made for young builders

Compatibility

Works with PF-style battery boxes, IR receivers and extension wires that use the gray 2×2 plug, including 8870-type lights and 8869-type extension cords. The plug presses onto the 2×2 stud contacts on the power source. LED bulbs fit standard 1-stud round openings.

What You Need to Make It Run

• Motors and lights will not run on their own. They need a power source: a battery box, a rechargeable lithium box, or a receiver connected to power. Each is sold separately.
• AA and AAA battery boxes do not include batteries.
• How it connects: the gray 2×2 plug presses onto the 2×2 stud contacts on the battery box or receiver. There is no socket hole to plug into.
• A basic battery box gives on and off (some also switch direction). For remote speed control you need a remote and receiver.
• Not every part uses the same plug. Check the plug shown in the photo for the option you pick, and message us before ordering if you are not sure.

Two LEDs. One cable. Every build illuminated.

Product photos may include display scenery or other items that are not included. Check the selected option and What's Included before ordering.